special product launch pricing until June 30th
- Interfaces to Cooke /i metadata port on lens
- Streams focus distance, t-stop value and focal length and more, at video framerate
- Compatible with Zeiss eXtended Data used by Zeiss and Fujinon lenses
- Streams built in lens distortion, shading/vignetting values and entrance pupil position
- Samples lens metadata synchronously with video genlock
- Streams timecode stamped metadata over UDP from 23.98fps to 60fps
- OLED display to show settings, live lens metadata and more
- Interfaces directly to Unreal Engine using open-source plugin & blueprint, or create your own
- Powered via PoE (802.3af) or 2 pin Lemo (not included)
Factory Optic designed the MARK ZERO to simplify the bridge between cinema lenses and virtual production systems, such as Unreal Engine. The SYNCRO-LINK MARK-ZERO can connect to lenses with the Cooke /i data interface, which provides all typical lens values (focus distance, T stop, focal length, entrance pupil position, depth of field with near and far focus, and hyperfocal distance), as well as the Fujinon Premista zoom lenses and Zeiss Supreme prime lenses (which support Zeiss eXtended Data), and can also provide lens distortion and shading/vignetting data. All metadata is sampled at the same rate as the incoming SYNC, up to 60 times per second. Metadata output, as calibrated by the lens manufacturer, has the advantage of not requiring user lens calibration. Live streaming of lens data to Unreal Engine, or any server for virtual production is accomplished over Ethernet.
The combination of a lens with Zeiss eXtended Data, the Mark Zero and the available open source plugins for Unreal Engine makes for the quickest setup.
Dimensions: 145mm x 108mm x 28mm/5.7″ x 4.25″ x 1.1″
- DSUB: Cooke /i data
- BNC: SYNC/Genlock input trilevel (SMPTE 274) and bilevel (NTSC/PAL)
- BNC: Timecode SMPTE 12M
- RJ45: 802.3af PoE, 10/100 Ethernet
- Lemo: 2pin DC power (8-28VDC)
Power: 4W max
Download product PDF
Please inspect the product within 3 days/72 hours of being received.
ALL FACTORY OPTIC PRODUCT RETURNS REQUIRE AN RETURN MATERIAL AUTHORIZATION (RMA) NUMBER.
REQUESTING RETURN AUTHORIZATIONS
All return requests must be made by emailing firstname.lastname@example.org or calling us and requesting an RMA form. RMA Numbers ensure that returned products will be properly credited to the Customer’s account. Products returned without authorization numbers will be returned to the sender. Please be prepared to provide related part number, and order number when requesting return authorizations.
RETURNS DUE TO PRODUCT ISSUES
1. Incorrect Product Shipped
FACTORY OPTIC will promptly provide Returned Material Authorization numbers for incorrect parts. Product must be returned in original packaging with factory seal intact and labeling to help our investigation and processing. Your account will be credited when product returns are received and verified by our Distribution Center.
2. Product Defect Claims
FACTORY OPTIC’s warranty policy for products claimed defective is to repair and return (no product exchanges). Please see our Warranty & Repair policy for more details.
3. Shipping Damage
If you receive damaged product with visible damage to external shipping containers, please report the damage to the carrier at the time of receipt. Please contact the FACTORY OPTIC with details of the damage.
4. Return Requests due to Customer Errors or Customer Convenience
FACTORY OPTIC will consider return requests, at our sole discretion and without obligation, due to Customer Error or Customer Convenience subject to the following restrictions:
a. Product must be undamaged and be in the Original Manufacturers sealed Packaging to ensure that there has been no possibility of physical damage, Electrostatic Discharge Damage (ESD) or exposure to moisture. FACTORY OPTIC must be able to restock and resell this product with absolute confidence.
b. Product must be have been shipped by FACTORY OPTIC and received by within the past 3 days.
c. Customer Convenience and Customer Error Returns shall be subject to restocking charges equal to 15% of the product’s purchase price or a $50 minimum charge – whichever is higher. In the event of a broken product seal, a 25% restocking fee will be applied to cover the cost of inspection, testing and QC.
d. All Customer Error or Customer Convenience Returns will be carefully inspected prior to restocking. Any product that is not suitable for restocking will be returned to the Customer without credit.
There are no reviews yet.